The JGM761FT25 wheel telehandler has compact structure and small turning radius. It is equipped with the high pressure tubeless engineering tyre, high strength heavy duty drive axle and the self-developed transmission gearbox as well as the vertical middle hinged shaft lifting hydraulic cylinder. Along with the rising of the boom arm, the fork would come out with certain elevation angle for elevating the operating security and reliability of the product under the harsh and heavy load working conditions.
Meanwhile, the wheel telehandler takes usage of the coaxial flow amplifying steering gear and the dual pump confluence and shunt steering priority hydraulic system composed of priority valve and unloading valve. Through optimizing the hydraulic pipeline, the pressure loss of the pipeline can be reduced to get good energy saving effect. The product has novel structure and obtains two utility mode patents.
1. Designed with four-wheel drive mode, the telescopic loader has flexible steering driving ability.
2. For the high distance of the chassis from the ground, it can work under a variety of complex conditions.
3. The large departure angle of the balance weight enables strong grade ability.
4. The product has large power. The optimized working device of single rocker arm Z-form reversal mechanism can guarantee large breakout force and lifting force. The maximum lifting weight of the product can reach 25t.
5. Through finite element analysis and strong design for the key parts, the product has large bearing capacity.
6. The tyre of the wheel telehandler is 26.5-25 in specification with 36PR for front tyre and 28PR for rear tyre. Featuring strong bearing capacity, it is adaptive to poor working conditions.
7. The use of the hydraulic oil cooler keeps good thermal equilibrium of hydraulic system.
1. Sinotruk WD615 Engine or Weichai Landking Generation-II Low Speed Engine
2. Cooling or the Heating and Cooling Air Conditioner
3. Special Bucket
4. Tyre Protective Chain
1. 162kW Turbocharged Engine
2. Air-over-oil Caliper Disc Service Brake System and Pneumatically Controlled Clamp Type Parking Brake System
3. Single-stage 4-element Twin Turbine Torque Converter
4. Standard Tyre with the Specification of 26.5-25-36PR for Front Tyre and 26.5-25-28PR for Rear Tyre
5. Planetary Hydraulic Shift Transmission Gearbox
6. 60 Drive Axle with Four-wheel Drive Mode
7. Standard Boom Arm and Standard Quarry Stone Fork Loading Device
|Max. Loading Capacity||25000||kg|
|Max. Lifting Height||3200||mm|
|Dumping Height (26º)||2510||mm|
|Dumping Reach (26º)||1260||mm|
|Max. Grade Ability||20||º|
|Fork Dimension (L×W)||1500×1205||mm|
|Overall Dimension (L×W×H)||8535×3050×3525||mm|
|Min. Turning Radius||8000||mm|
|Working Device||Lifting Tine with Full Load||≤8.7||s|
|Fork Tilting Forward Time||≤6.7||s|
|Dropping Time with No Load||≤2.3||s|
|Total Cycling Time||≤17.7||s|
|Traveling Speed||Forward Gear I||12.5||km/h|
|Forward Gear II||36||km/h|
|Reverse Gear I||16||km/h|
Heavy Duty Forklift | Stone Blocks Handling Equipment | Industrial Loader